Each wood surfboard is custom made to any dimension, length, width, rocker, or shape.

Surfboards

All the boards from Mission Wood Surfboards are made with 90% sustainable, renewable, plantation grown products. We are currently looking into an organically based resin which would make our boards 100% organic.


Questions or more information e-mail me at mike@missionwoodsurfboards.com



Sold
click on picture for more pictures
Paulownia with 7 Redwood Stringers and Ebony Tail Block
9' 6" long
23" wide
18" at nose @ 12"
15" at tail @ 12"
3" thick
Rails 50/50
Rocker 3.5" nose

3.7" tail








Beautiful traditional style single fin longboard with redwood tail block. Built as a classic style nose rider. Subtle concave at the nose flows to a slight V up to the fin, and then flattens out at the tail.





SOLD

click on picture for more pictures
Paulownia with Redwood Stringers and Tail Block 
9' 6" long
23" wide
18" at nose @ 12"
15" at tail @ 12"
3" thick
Rails 50/50
Rocker 3.5" nose

          3.7" tail

Beautiful traditional style single fin longboard with koa, redwood, and paulownia tail block.  Built as a classic style nose rider.  Subtle concave at the nose flows to a slight V up to the fin, and then flattens out at the tail. If you love to trim and you've been looking for a board that will give you that Cadillac ride and glide, this is the one!  Pull the board into a tight trim along the top of the wave and move to the nose.  With this rocker design (heavier tail kick and flatter nose lift) you'll be able to perch almost indefinitely on the nose.   This board will put the fun and that permanently stoked smile and feeling back in your surfing.  Whether you're at the beach or kicking back in your living room admiring your board, this is functional art at its finest.  It's an heirloom that will last a life time and bring you so much joy.



SOLD
click on picture for more pictures
Cedar Modern Longboard
9' 6" long
23 1.2" wide
17" at nose @ 12"
14" at tail @ 12"
3 1/8" thick
Rails contemporary
Rocker 5.5" nose

          3" tail


This board has more rocker and a lower tucked under rail than traditional surfboard, a thruster with a 2&1 set up on fins.  Made from Cedar. 



SOLD
click on picture for more pictures
Paulownia Nose Rider, traditional style long board 
9' 4" long
22" wide
18" at nose @ 12"
14 1/2" at tail @ 12"
2 3/4" thick
Rails down rail design
Rocker 5" nose

          2.5" tail





Concave nose for lift. Flat V panels to the tail with slight double concave starting in front of center fin going flat at the tail to help with rail to rail transition. Great noserider that's quick and responsive in turns. 2&1 set up on fins. Made from Paulownia wood.  As with all our surfboards, this surfboard is constructed from  continuous boards, hollowed with opposing chambers for strength. 



SOLD
click on picture for more pictures
Paulownia with Cedar Stringers Surfboard
9' 0" long
22" wide
17 1/4" at nose
14" at tail
2 3/4" thick
Rocker 5" nose
              3 1/2" tail



Rocker: Slow arching and continuous with enough straightness to be fast but enough nose to tail rocker so it does not lock up in turns or purl.
Glassed with 4oz. S-2 cloth on top and bottom and 4 oz .deck patch option. 
Paulownia with Cedar stringers.  Single fin with side bites.  A board to be ridden cleanly with style on the nose or off the tail.  This model delivers more versatility than any long board design.  You'll get all the benefits of a single fin with the ability to trim instead of pump and increased nose riding traction, along with hard bottom turning and no slipping.  The side bites don't intrude on the single fin feel.  When the waves demand it, you'll have the power and ability to rip, along with the tri-fin turning axis.
  

        

 

 
 SOLD

 click on picture for more pictures
Cedar - Retro Fish
6' 6"
21 1/2" wide
3" thick











As with all our surfboards, this surfboard is constructed from  continuous boards, hollowed with opposing chambers for strength.  Traditional shape with flatter rocker.  Thicker deck carried to tail section with boxy hard rails.  Absolute speedster that will spin on a dime.  Fastest board in the water.  Good board for "slightly heavier" surfer.  Good width and thickness carried through tail section. flat bottom, quick, loose, skatey feel in quad.  Thruster feels a little more controlled in turns.
 



SOLD

click on picture for more pictures

Cedar - Fish modern/retro- 
6' long
20 1/2" wide
2 3/8" thick
















Classic fish shape incorporating modern short board dynamics.  More rocker than traditional board.  2 3/4" rocker on tail, 5" rocker on nose, neutral rails fading to tucked under rail with dime radius on tail area.  Super quick and responsive but wide enough and flat enough to get through slow sections. As with all our surfboards, this surfboard is constructed from  continuous boards, hollowed with opposing chambers for strength.







 SOLD

 click on picture for more pictures
M3 Cedar Surfboard
5' 5" long
19 7/8" wide
2 1/4"  thick






Extremely fast down the line.  Medium to tucked under edge, hard rails behind fins, extremely responsive in turns due to harder thinner rails on tail section, tri-fin thruster, less entry rocker, flotation moves slightly forward, flatter bottom with less rocker

                         Surfboards will be priced upon request

Custom orders have priority!  I will set aside any project I'm working on to work on your custom order.  Custom orders take approximately 30 days to complete. 

Our surfboards are hand built custom wood surfboards.  Because of the way they are made they can be built to any size or shape with as many options as a foam surfboard.  They start from solid pieces of wood laminated together, then chambered (hollowed) to 3/8" -1/4", with opposing chambers for strength.